ektar

On Processing Photos

I did this a while back on portraits, but here’s a little behind-the-scenes on how I process my photos in Lightroom.

Let’s take a photo from the Heidelberg Project in Detroit – blending a few favorite subjects of mine: an abandoned house, public art in an urban setting, good mix of light and deep shadows.

Here’s a before and after. The photo was captured with a Canon 7D and 24-70mm f/2.8 Sigma lens. The framing of the brick pillar and the burned black ceiling, with the shaft of light streaming down the stairs, made for an interesting scene.

I start with exposure. Is the frame too dark? Too bright? How about white balance. After adjusting those in Lightroom, I pick my VSCO present. These days, it’s Film 05′s Kodak Ektar 100. That particular film setting has a lot of options, but I usually stick with the default, or play with the Contrast+ setting.

I like Ektar because of its high-contrast, green-tinted-shadows look. It’s not afraid to let the shadows go completely to black, and it’s a warmer film tone. But that’s just the start.

From there I’ll probably add a bit more punch in the contrast setting, drop the highlights a bit to let more detail in the bright spots, and drop the blacks down to give it that really contrasty look. Shadows are my friend.

Depending on the image, I’ll also reduce the saturation a bit. Adding contrast makes the colors pop a bit too much for my liking (those shoes might be a bit too blue for my taste).

Increase the sharpening a tad (usually to the 30 mark, with some masking to only sharpen the edges), maybe bump the clarity (only for non-people photos), and increase the color noise reduction if I have to. Peeking at the shadows and dark spots in the photos lets me know if there is color noise.

Hit the “Remove Chromatic Aberration” toggle if I need to, and do any kind of lens or perspective corrections if I have to. And then I’ll add a bit of a vignette and, especially for VSCO film packs, reduce the grain level. My settings rarely have grain going anywhere above 20-30.

As a last touch, I’ll sharpen little details with the adjustment brush, spot remove anything that seems out of place, and crop a bit.

That’s it. Nothing complicated or fussy. I’ll spend a very short amount of time on a photo, and bring it into Photoshop to do any kind of heavy lifting. Getting it most of the way there in camera is the important part, allowing me to make the styling adjustments as needed.

Questions? Give me a shout.


Kodak Ektar 100

Kodak Ektar 100

Had my first roll of Kodak Ektar 100 printed, and boy, talk about some touchy film.

Or I should say, touchy camera (my Canonet) and film combo. Lots of underexposures, crushed blacks, and double exposures (like the one above) in the roll.

It’s a bummer when the photos you’re looking forward to seeing come out botched. But that’s the magic of film, right?